For sales and advice call:

01278 760068

You have no items in your shopping cart.
Follow us on:

Balmoral

Balmoral Wooden Driveway Gate - BA3

The BA3 Balmoral wooden driveway gates blend the privacy and security of the BA1 and BA2. The upper infill panels of these entrance gates are steel bars. The lower section of these wooden gates is manufactured with tongue and groove timber boards.

All our wooden gates, doors, etc., can be bought directly online, by phone, or 'made to measure'.

Call Bespoke Gates on: 01278 760068

The Balmoral BA3 wooden driveway gates offer privacy and security.

The gates are manufactured using ex 75mm hardwoods. The upper sections are in filled with steel bars within cages and the lower section with horizontal tongue and groove hardwood boards.

The boards in our wooden gates are set in a groove within the frame to allow for expansion and contraction and are fixed to the frame with recessed screws and timber plugs to conceal the screw heads.

The standard heights are 1900mm overal falling to 1400mm at the centre, based on a 3.6m opening. Heights and widths can be varied to suit most sizes of entrance gates.  

Made with traditional mortice, tenon & wedge joints. A high quality glue is used throughout to maximise the strength of our driveway gates. The gates have a solid bottom rail - ideally suited for automation. A pair of Balmoral gates can also be used as an automatic sliding gate.

All the steel work is galvanised and powder coated black as standard but can be coated to any RAL colour if required - POA

Special hinges can be manufactured to fit the radius of the top rail.

Choice of top quality hardwood timbers: Iroko, Sapele, Idigbo, Douglas Fir or Oak - see here

Choice of Stains, Oils and Paints availabe - see here

 

Here's how to obtain a quotation from us........

Insert your email address below and we'll send you a short form.  

Simply reply with whatever detail you can provide and we'll be in touch. 

Request enquiry form

*

All our gates and garage doors can be 'made to measure' Please contact us should you not see the size or design you require. Our products can be 'customised' according to your requirements.  01278 760068 

We offer a 'colour-match' paint service and various stains and oils for all our wooden gates and garage doors - to find out more see our paints, stains and oils

So if you'd like to discuss the painting, oiling or staining of your purchase, or if you have a specific design in mind, or just need a certain size that you can't find here - then please do call us on 01278 760068 

Balmoral Wooden Driveway Gate - BA3

Product Options

£3,688.63 ex VAT

If it can be made - we can make it! Call: 01278 760068