Framed, ledged and braced with tongue & groove infill these wooden entrance gates are made with traditional mortice, tenon & wedge joints. A high quality glue is used throughout to give maximum strength to these wooden gates. Convex (bow), concave or flat top rail.
Manufactured from ex 75mm timbers with a solid bottom rail - ideally suited as an automated driveway gate. The boards are set in a groove within the frame to allow for expansion and contraction and are fixed to the frame with recessed screws and timber plugs to conceal the screw heads. The flat top Henley hardwood driveway gate can also be used as a single sliding gate for automation.
The standard rise of the top rail is 130mm (5”) but can be varied to suit non standard openings. The solid bottom rail is ideally suited for automation.
If it can be made - we can make it! Call: 01278 760068
Wooden driveway gates manufactured from ex 75mm timbers with recessed tongue & grooved vertical boarding. These wooden driveway gates have a solid bottom rail making them ideally suited as automated entrance gates.
These high quality wooden driveway gates are manufactured from ex 75mm timbers with recessed tongue & grooved vertical boarding and a solid bottom rail making them ideally suited as automated driveway gates. The middle rail is visible on both sides of these wooden entrance gates.
Framed driveway wooden gates manufactured from ex 75mm timber constructed as a pair. Matching hardwood panels are used when stained.these entrance gates are ideally suited as automated wooden driveway gates
Shown in picture manufactured from Sapele painted grey.
Framed gate manufactured from ex 75mm timber constructed as a pair. Tricoya panels are used making this wooden gate suitable for a painted finish.